Invacare Pronto M71 Base Скачать руководство пользователя страница 38

Страница: 38 / 80

SECTION 11—WHEELCHAIR OPERATION

Pronto® M71™Base with SureStep®

Part No 1143240

FIGURE 11.6

LCD Display Screens - Main Screen

Driving Screen

NOTE: For this procedure, refer to

FIGURE 11.7.

This screen is shown when the operator

issues a drive command and the Drive Icon

on the main screen was highlighted.

NOTE: The Drive’s name, warning/info

message, status icon and battery indicator are

displayed on this screen.

FIGURE 11.7

LCD Display Screens -

Driving Screen

STATUS INDICATOR

The status indicator will show a “Warning” (exclamation point inside a triangle)

indicator when the chair has a condition that requires attention.

The status indicator will show a “STOP” sign when a serious condition exists. The

chair will not be allowed to operate.

The status indicator shows an Attendant Icon if the attendant’s override switch is

active.

MODES

The dotted-box shows the area that contains the available “modes” in the cur-

rently selected drive. The modes are programmed for each drive and are based

upon the configuration of the chair.

These modes are highlighted when the Mode is active. The operator changes

modes by pressing the Mode Select Switch.

The available modes are as follows:

Drive Mode (1 through 4)

Automatic Positioning

Actuator Control Switch Mode (4-switch, 4-switch 2 levels, etc.)

ECU Output Activated (1 through 4)

RIM Mode Activated

Drive Select Mode Activated

No Driving

ITEM

DESCRIPTION

Available Modes in

this Drive (Must be

Programmed)

ECU

Drive Indicator

Icon appears when a joystick

command will drive the

wheelchair

Battery Gauge Display

Status/Info Message Area

Status

Indicator

Drive Profile Name

Содержание Pronto M71 Base

















































































Результаты поиска

Содержание Pronto M71 Base

Отзывы:

Похожие инструкции для Pronto M71 Base

Бренды по названию

Популярные бренды

Invacare Pronto M71 Base, Руководство владельца по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Pronto M71 Base

Отзывы:

Похожие инструкции для Pronto M71 Base

Бренды по названию

Популярные бренды