Invacare Pro Tennis Top End, Руководство пользователя

Страница: 42 / 76

Top End® Sports Series
5.6 Removing Play from Rear Wheels
WARNING!
RISK OF INJURY OR DAMAGE
– After any adjustments, repair or service and before
use, make sure all attaching hardware is tightened
securely. Otherwise injury or damage may occur.
With the rear wheel and quad-release axle still mounted onto the
wheelchair, make the following adjustment:
•
Tighten the length adjusting screw until there is no in and out
movement of the quad-release axle and rear wheel.
5.7 Preventing Play in Rear Wheels
To prevent play in rear wheels install the rear wheel bolt securing
lock washer system.
1. Attach camber clamp
D
to wheelchair frame
C
.
2. Insert bolt E through camber clamp D and tighten securely.
3. Place washer
A
between axle receiver and nut assembly
B
and
wheelchair frame C .
4. Tighten axle receiver and nut assembly
B
securely.
5.8 Adjusting Quick-Release Axles
1. Remove rear wheel and quick-release axle A from the
wheelchair.
2. Depress detent pin
D
in the quick-release axle
A
and slide axle
through the wheel hub.
3. Release detent pin
D
ensuring that the locking pins
C
are fully
released.
4. Increase or decrease end play by adjusting the locknut
B
on the
end of the quick-release axle
A
.
5. Install the rear wheel onto the wheelchair and ensure the wheel
is securely engaged.
Quad-Release Axle not shown. Locking pins on the
Quad-Release Axle are the same as Quick-Release Axle.
42 1171910-A~15