Invacare® Platinum® Mobile Portable Oxygen Concentrator (POC1-100C) Firmware Upgrade
2
60108780-B
2
Service
2.1
Upgrading Firmware
1.
Remove the batteries and disconnect the AC power adapter, USB
cable, and cannula from the concentrator. Refer to the user
manual for detailed information.
2.
Connect the AC adapter to a power outlet.
3.
Press and hold the Mute button and the Backlight button on the
control panel.
4.
While holding the Mute and Backlight buttons, connect the AC
adapter to the concentrator.
5.
The External Power Indicator will flash RED to indicate a
connection between the concentrator and the PC.
6.
After the red light flashes, release the Mute and Backlight buttons.
7.
Connect one end of the USB cable to the USB port on the
concentrator.
8.
Connect the other end of the USB cable into the USB port of the
PC.
Connection location may vary by PC style. A notebook PC is
shown.
9.
Open Windows Explorer on your PC and find the UPLOAD_DISK drive.
