Invacare Modulite Bora XTR Series, Руководство по обслуживанию

Страница: 17 / 28

Service
Regular seat width Seat width 53
1. Loosen screw in position
A
or
B
.
2. Adjust recline to desired angle.
3. Tighten screws in position A or B .
4.7.6 Adjusting Matrx backrests
See corresponding manual.
4.7.7 Adjusting Flex3 tension adjustable backrest
For adjustment of Flex3 tension adjustable backrest, see
user manual.
4.8 Setting anterior tilt
4.8.1 Anterior tilt
The seating system can be set to a predefined anterior tilt.
For TDX SP2 and TDX SP2 Low-Rider:
•
5° anterior tilt which reduces the maximum possible tilt by 5°
Orientation of tilt wedge
5° anterior tilt
Setting tilt
CAUTION!
Risk of strains from lifting heavy parts!
– Use proper lifting techniques.
Tools:
•
6 mm Allen key
1. Remove seat.
2. Align tilt wedge with holes on module and in the desired
orientation. See graphics above.
3. Insert screws and tighten.
4. Align seat with holes on tilt wedge and install.
Anterior tilt — replacing battery front cover
Tools:
•
14 mm (5/8”) Allen key
1. Remove the front cover as described in the service manual of
TDX SP2.
2.
Push the recessed front cover
A
down on the hooks
B
.
3. Re-tighten the screws
C
finger-tight.
4.9 Adjusting adapter for universal seat
4.9.1 Adjusting universal seat adapter width
Tools:
•
3 mm Allen key
•
10 mm wrench
1.
Loosen and remove four screws
A
.
2. Put seating plate on top of adapter plates.
1604311-A 17