SECTION 3—OPERATION
14
SECTION 3—OPERATION
Bed Set-Up
Preparing the Bed
WARNING
For patient safety, the bed frame MUST have side rails.
Some homecare beds have adjustable width side rails. Set the side rail width so the
rails touch the mattress. Avoid a gap between the mattress and side rail.
The side rails MUST be in the up position when the patient is lying on the bed.
This mattress is not intended for use on a residential bed.
1. Remove the original bed mattress and place it in storage.
Installing the Power Unit
NOTE: For this procedure, refer to FIGURE 3.1.
NOTE: The standard power unit installation is on the upper edge of the footboard.
1. Select the appropriate width swing-out mounting brackets
NOTE: Two sizes are available on the rear panel.
2. Place the power unit on the footboard.
3. Run the power cord under the center of the bed.
FIGURE 3.1
Mounting Brackets
Mounting Brackets
Содержание microAIR 3500S
Страница 29: ...APPENDIX 29 MicroAIR 3500S NOTES...
Страница 30: ...APPENDIX MicroAIR 3500S 30 NOTES...
