Invacare Infinity LoBack Support Скачать руководство пользователя страница 3

3

SAFETY SUMMARY

SAFETY SUMMARY

S
A

F

E

T

Y

S
U

M
M

A
R
Y

NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact your Dealer for further instruction.

INSTALLATION WARNINGS

Stabilize from the ground up. A stable base, pelvis and footrests are requirements for any torso
positioning system.

For proper installation of the Infinity LoBack and to reduce the risk of pressure sores, the adjust-
ment procedures in this manual MUST be performed in the following order:

1.

Adjusting the Mounting Hardware/Height

2.

Adjusting the Depth Hardware

3.

Adjusting the Angle

4.

Adjusting the Lateral Supports

Ensure the cane clamps that secure the Infinity LoBack to the wheelchair are properly secured to
the wheelchair BEFORE using. Otherwise, changes in seat depth will occur, making the wheel-
chair less stable.

After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tight-
ened securely - otherwise injury or damage may occur.

STABILITY WARNINGS

The seat height, seat depth, back height, tilt angle, back angle, pivot point of seat frame, seating
system, caster position, size and position of the rear wheels, wheel locks, anti-tippers, locking col-
lar as well as the user condition directly relate to the stability of the wheelchair.  Any change to
one (1) or any combination of the fourteen (14) may cause the wheelchair to decrease in stabil-
ity. Use EXTREME caution when using a new seating position.

Seat Height

Back Height

Seat Depth

Back Angle

Seating System

Tilt Angle

Seat Frame Pivot Point

Caster Position

Rear Wheel Size

Rear Wheel Position

User Condition

Seat Dump

Locking Collar

Seat Height

Back Height

Seat Depth

Back Angle

Seating System

T

ilt Angle

Seat Frame Pivot Point

Caster Position

Rear Wheel Size

Rear Wheel Position

User Condition

Wheel Locks

Anti-T

ippers

Locking Collar

Seat Dump

NOTE: When changes to the left hand column occur, follow across the chart and refer to the 

✓ 

procedure to

maintain the proper stability, safety and handling of the wheelchair.

NOTE:  Additional adjustments may be needed according to the wheelchair type. Refer to the wheelchair
owner's manual for these procedures.

Содержание Infinity LoBack Support

















Отзывы: