Part No 1143214
1
ICCI Bed Rails and Accessories
For more information regarding Invacare Continuing Care, Inc. (ICCI) products, parts, and services,
please visit www.invacare-ccg.com or call 800-668-2337
ICCI Bed Rails and Accessories
Part No. 6801A, 6803A, 6808A, 6815A, 6816A, IH5748A, IHRAILTS-DLX
NOTE: Check all parts for shipping damage before using. In case of damage, DO NOT use the equipment. Contact the
Dealer/Carrier for further instructions.
Safety Summary
WARNING
DO NOT use this product or any available optional equipment without first completely reading and
understanding these instructions and any additional instructional material such as owner’s manuals, service
manuals or instruction sheets supplied with this product or optional equipment. If you are unable to understand
the warnings, cautions or instructions, contact a healthcare professional, dealer or technical personnel before
attempting to use this equipment - otherwise, injury or damage may occur.
These bed rails are intended to prevent an individual from inadvertently rolling out of bed. DO NOT use for
restraint purposes.
DO NOT use the bed rails as push handles for moving the bed.
ALWAYS test to make sure that the bed rails are properly and securely in place before using.
Although bed rails are not rated to any specific weight limitation, the bed rails may become deformed or broken
if excessive side pressure is exerted on the bed rails. This bed rail is not an assist rail for getting into or out of
bed. DO NOT use the bed rails as push handles when moving the bed.
ACCESSORIES WARNING
Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories.
Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for
use with Invacare products.
ENTRAPMENT WARNING
Proper patient assessment and monitoring, and proper maintenance and use of equipment is required to reduce
the risk of entrapment. Variations in bed rail dimensions, and mattress thickness, size or density could increase
the risk of entrapment. Visit the FDA website at http://www.fda.gov to learn about the risks of entrapment.
Review “A Guide to Bed Safety”, published by the Hospital Bed Safety Workgroup.
Refer to the bed owner’s manuals for additional product and safety information.
Mattress MUST fit bed frame and bed rails and/or positioning device snugly to reduce the risk of entrapment.
After any adjustments, repair or bed service and before use, make sure all attaching hardware is tightened
securely. Rails and/or positioning devices with dimensions different from the original equipment supplied or spec-
ified by the bed manufacturer may not be interchangeable and may result in entrapment or other injury.
Installing/Using the Epoxy Bed Rails
NOTE: For this procedure, refer to FIGURE 1.
Installing 6801A and 6808A Bed Rails
1.
Position the pivot brackets on the bed frame as shown in Details “A” and “B” of FIGURE 1.
2.
Loosely attach the pivot brackets to the bed frame with the hex bolts and locknuts.
NOTE: DO NOT tighten the hex bolts and locknuts at this time.
3.
Slide the mounting pins of the bed rails through the pivot tubes.
NOTE: Make sure the release lever on the bed rail is pointing towards the foot end of the bed.
Assembly, Installation and Operating Instructions
SAVE THESE INSTRUCTIONS
