Invacare Fox Скачать руководство пользователя | Manualshive

Страница: 24 / 92

background image

Invacare® Fox™

4 Accessories

4.1 Posture belts

A posture belt is an option which can either be fixed to
the mobility device ex-works or can be retrofitted by your
specialist provider. If your mobility device is fitted with a
posture belt, your specialist provider will have informed you
about fitting and usage.

The posture belt is used to help the mobility device user
keep an optimum seating position. Correct use of the
belt assists the user in sitting securely, comfortably and
well-positioned in the mobility device, especially for such
users who do not have such a good sense of balance while
sitting.

We recommend using the posture belt whenever the
mobility device is used.

4.1.1 Types of posture belts

Your mobility device can be fitted with the following
posture belt types ex-works. If your mobility device has
been fitted with a different belt to those mentioned below,
please ensure that you have received the manufacturer's
documentation with regard to correct fitting and use.

Belt with metal buckle, adjustable both sides

Belt can be adjusted on both sides. This means that the
buckle can be centrally positioned.

Belt with plastic buckle, adjustable both sides

Belt can be adjusted on both sides. This means that the
buckle can be centrally positioned.

4.1.2 Adjusting the posture belt correctly

The belt should be tight enough to ensure that you
are sitting comfortably and that your body is in the
correct sitting position.

1.

Ensure that you are sitting correctly, which means that
you are sitting right at the back of the seat, your pelvis
is positioned erect and as symmetrically as possible, not
to the front, to the side or at one edge of the seat.

2.

Position the posture belt so that your hipbones can be
easily felt above the belt.

3.

Adjust the belt length using one of the adjustment aids
described above. The belt should be adjusted so that
you can fit a flat hand between the belt and your body.

24

1577074-F

«
...
22
23
24
25
26
...
»

Содержание Fox





























































































Отзывы:

Нет отзывов

Похожие инструкции для Fox

Бренд: Decon wheel Страницы: 26

NXT Generation NEXT

Бренд: Invacare Страницы: 43

progeo BASIC LIGHT

Бренд: Rehateam Страницы: 22

Бренд: SOMA Страницы: 32

Бренд: Drive Страницы: 6

Бренд: Drive DeVilbiss Страницы: 12

Бренд: Drive DeVilbiss Страницы: 24

Бренд: Maximex Страницы: 6

Бренд: Handicare Страницы: 110

Бренд: Handicare Страницы: 13

Бренд: Handicare Страницы: 16

Бренд: identités Страницы: 10

Бренд: KYMCO Страницы: 37

Quantum Litestream XF

Бренд: Pride Страницы: 44

Бренд: Pride Страницы: 44

Бренд: Quickie Страницы: 92

Бренд: Schuchmann Страницы: 20

Бренд: Schuchmann Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды