Invacare Formula CG Elevate, Руководство пользователя

Страница: 82 / 95

Invacare® Formula™ CG Seating
7.36 Checking Seating System Mounting
Position
Detail “A” — Swing Away
Front Rigging
Detail “B” — Center Mount
Front Rigging
For Formula CG Seating System - These instructions apply to
Formula CG Tilt, Recline, Tilt/Recline seating systems only.
1. Determine mounting position:
•
Wheelchairs with Swing Away Front Rigging A —
a. Rotate front casters B forward as if the wheelchair
were moving in reverse.
If wheelchair is equipped with composite
footrests, point the front casters toward the
footplate.
b. Measure the gap
C
between the front caster and the
footplate
D
. Perform one of the following:
– Gap is 1 to 1½ inch Gap - Seating system is in the
proper mounting position.
– Gap is Greater than 1½ inches - Seating system is
not in the proper mounting position. Proceed to
Adjusting Seating System in next section.
•
Wheelchair with Manual or Power Center Mount Front
Rigging
E
-
a. Position center mount front rigging to the lowest
setting to position the footplate
F
as close as possible
to the front shroud G .
b. Measure the gap H between the footplate and the
front shroud.
c. Perform one of the following:
– Gap is 1 to 1½ inch Gap - Formula CG seating
system is in the proper mounting position.
– Gap is Greater Than 1½ inches - Formula CG seating
system is not in the proper mounting position.
Proceed to Adjusting Seating System in next section.
82 1143155-R-01