Invacare Formula CG Elevate, Руководство пользователя

Страница: 52 / 95

Invacare® Formula™ CG Seating
7.5 Service Inspection
Every six months take your wheelchair to a qualified
technician for a thorough inspection and servicing.
Service inspections MUST be performed by a technician.
Refer to wheelchair base user manual for additional safety
inspection and troubleshooting information.
DANGER!
Risk of Injury, Damage or Death
Overinflation of tires may cause tires to explode.
–
Inflate tire to the proper tire pressure (P.S.I. /
kilopascals) listed on the side wall of the tire.
–
Only use wheelchair with tires at proper pressure.
–
The wheels and tires should be checked periodically
for cracks and wear and should be replaced if
necessary.
WARNING!
Risk of Serious Injury or Damage
Attaching hardware that is loosely secured could cause
loss of stability resulting in serious injury or damage.
– After ANY adjustments, repair or service and before
use, make sure that all attaching hardware is tightened
securely.
The following are recommended items to inspect during regular
service inspections performed by a qualified technician. Actual items
to be inspected during the service inspection may vary according
to the specific wheelchair:
7.5.1 Six Month Inspection
q
Clean upholstery and armrests.
q
Check that all labels are present and legible. Replace if necessary.
q
Ensure clothing guards are secure.
q
Ensure adjustable height arms operate and lock securely.
q
Ensure upholstery does not have any rips or tears.
q
Ensure armrest pad sits flush against arm tube.
q
Ensure arms are secure but easy to release and adjustment
levers engage properly.
q
Inspect seat positioning strap for any signs of wear. Ensure
buckle latches. Verify hardware that attaches strap to frame is
secure and undamaged. Replace if necessary.
q
Check center mount front riggings for loose fasteners. Replace
/tighten if necessary.
q
Check that cables are routed and secured properly to ensure
that cables do NOT become entangled and damaged during
normal operation of seating system.
q
Ensure proper operation of powered functions (Example:
seating and legrests).
q
Inspect electrical components for signs of corrosion. Replace if
corroded or damaged.
q
Inspect all fasteners.
q
Inspect TRBKTS fasteners and hardware.
q
Inspect foam handgrips for damage. If damaged, have them
replaced by a qualified technician.
q
Check power center mount front riggings for worn/frayed belts
and/or loose fasteners. If found, replace these items.
q
Make sure all electrical connections are secure.
q
Make sure drive lock-out operates properly.
q
Check limit switch position.
q
Make sure seating systems with the recline function have the
retaining pin in place at the top of each back cane.
q
Make sure all systems, except Elevate Only, have the retaining
pin in place at the back of each seat rail.
q
Check that spreader bar mounting fasteners are tight.
52 1143155-R-01