9 SEAT
Invacare
®
Crossfire™T7A Wheelchair
56
Part No 1167484
9 Seat
9.1
Replacing Seat Upholstery
1.
Remove the seat cushion from the wheelchair.
2.
Remove the mounting screws that secure the seat upholstery to the seat frame.
3.
Lift up on the back upholstery cover separating the fastening strips of the back upholstery cover from the fastening strips of the seat (Detail “A”).
4.
Remove the existing seat upholstery.
5.
Install new seat upholstery and secure in place with mounting screws. Tighten securely.
6.
Install the seat cushion onto the wheelchair.
WARNING
ALWAYS perform these procedures in the presence of an assistant. The position of the footrest, camber tube, seat angle,
back angle, the tautness of the back upholstery as well as the user's condition are directly related to the wheelchairs
stability. Any change to one or any combination of the five may cause the wheelchair to decrease in stability. Use EXTREME
caution when using a new seating position. The addition of anti-tippers may be required.
After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely -
otherwise injury or damage may occur.
WHEELCHAIR DEPTH
NUMBER OF SCREWS
14 to15 inches
10
16 to17 inches
12
18 inches
14
19 to 20 inches
16
