
Invacare® Comet Series
3.
Remove shroud.
4.
Disconnect battery plugs
A
.
Replacing lifter
1.
Remove batteries.
2.
Disconnect lifter cable at wiring harness connecting
plug in motor enclosure.
3.
Remove screws (1) on lifter (2).
4.
Replace lifter.
5.
Install parts in reverse order.
6.
Test all functions.
Replacing lifter controls
1.
Remove both screws (1) from lifter controls (2).
2.
Replace lifter controls (2).
3.
Install parts in reverse order.
4.
Test all functions.
Replacing fuses in lifter controls
1.
Loosen and remove screws on lifter controls shroud.
2.
Replace fuse (1).
3.
Install parts in reverse order.
4.
Test all functions.
5.5.5 Replacing power module
CAUTION!
Risk of accident
When parking mobility device on antitippers it
is no longer slowed by motor brake. Mobility
device can roll away out of control.
– Place mobility devices’s rear frame on a
supporting wooden block before you remove
wheels.
CAUTION!
Risk of burning if power cable is shorted
– Turn off power completely before removing
any power supply components of mobility
device. Therefore take out batteries.
– Avoid bridging of contacts during
measurements on live electrical components.
CAUTION!
Any changes to the drive program can affect
the driving characteristics and the tipping
stability of the mobility device.
– Changes to drive program may only be carried
out by trained Invacare® specialist providers.
– Invacare® can only give a warranty for safe
mobility device driving behaviour - especially
tipping stability - for unaltered standard drive
programs.
CAUTION!
Risk of accident. Accidental rolling can lead
to accidents.
– Secure mobility device against rolling away.
The controls system is supplied with a standard
drive program. If you have carried out
customer-specific modifications to the drive
program, you will have to make these changes
again after installing the new power module.
When disassembling, note position of small parts
such as screws and washers. Put small parts down
so that they can be reassembled in right sequence.
18
1603798-D
Содержание Comet ULTRA
Страница 35: ...Notes...