SECTION 5—SEAT
31
5. Mount the front seat tube to the seat frame with the two (2) mounting bolts. Refer to
Detail “A” of FIGURE 5.4.
6. Install the under seat basket. Refer to Removing/Installing Under-Seat Basket on
7. Install the arm tubes. Refer to Removing/Installing Arm Tube on page 34.
8. Install the seat. Refer to Removing/Installing the Seat on page 26.
Replacing the Seat Latches
NOTE: For this procedure, refer to FIGURE 5.5.
1. Remove the seat. Refer to Removing/Installing the Seat on page 26.
2. Turn the seat upside down.
3. Perform one (1) of the following:
• For Rear Seat Latches - untie the release cord from the latch.
• For Front Seat Latches - remove the front seat release loop.
4. Remove mounting bolt and locknut that secures the latch to the seat frame.
NOTE: DO NOT remove the latch bolt.
5. Insert the new latch onto the frame.
6. Install the mounting bolt and locknut.
7. Perform one (1) of the following:
• For Rear Seat Latches - insert the release cord through the hole in the latch and
secure the cord to the latch.
• For Front Seat Latches - secure the front seat release loop to the latch with the one
(1) locknut.
8. Install the seat. Refer to Removing/Installing the Seat on page 26.
FIGURE 5.5
Mounting
Bolt
Locknut
Latch Bolt
DO NOT
Remove
Latch
Seat
Frame