Invacare Alegio NG, Руководство пользователя

Страница: 20 / 108

Invacare® Alegio NG
5 Maintenance
5.1 General servicing information
IMPORTANT!
– The mattress support must be supported
during service inspections, to prevent accidental
lowering.
– Only personnel who have received the
necessary instructions or training may perform
service and maintenance of the bed.
– After reconditioning the bed, or if bed functions
change, service must be carried out according
to the check list.
A service contract can be made in the countries, where
Invacare® has its own sales company. In certain countries
Invacare®offers courses in service and maintenance of the
bed. Spare parts lists and additional user manuals are
available from Invacare®.
Before Use
• Ensure that all manual and electrical parts functions
correctly and are in a secure state.
• Check, by raising and lowering the bed, that the shear
arms run smoothly in the guideways.
After three months
• Ensure that all manual and electrical parts are
functioning, and tighten bolts, screws, nuts, etc.
Every year
• We recommend a safety test comprising the motors’
performance and mechanical state.
Every second year
• We strongly recommend a service according to the
below checklist after two years of normal use and then
every second year.
Motors, hand control and control units are serviced
by exchanging the faulty part.
5.2 Checklist - Maintenance
Checkpoints
q Circlips, cotter pins and plastic fixing ring - properly
locked and intact.
q Screws - tightened.
q
Weldings - intact.
q Side rail locking and moving system - properly locking
and running smoothly.
q Castor fittings - tightened.
q Castor brakes - locking properly.
q
Height adjustment motor - running properly.
q Backrest motor - running properly.
q
Thigh section motor - running properly.
q Wires - correctly wired and undamaged.
q Electric plugs - undamaged.
q Damaged coating - repaired.
q Line side rail straps - not frayed or cracked.
q
Accessories - correctly assembled and correct function.
q Rastofix fitting - check function.
q
Motors, control unit and hand control - keep clean from
dust and dirt. Check for damage.
q
Anchor points, cables, piston rod, casing and plugs -
Check for damage.
5.3 Inspection after relocation - Prepare for
new user
IMPORTANT!
When the bed has been relocated; before given
to a new user it has to be thoroughly inspected.
– Inspection must be done by a trained
professional.
– For regular maintenance see maintenance chart.
5.4 Checklist - After relocation
Checkpoints
q Check the fittings between shear arm and mattress
support (screws tightened properly).
q Check the locking of the motors (pipe pins correctly
mounted).
q Check the electronic wiring for the motors (wires not
squeezed).
q Check that the enclosing of the motors are intact (no
cracks that enables fluids to pierce).
q Check the sections of the mattress support by using
the hand control to activate all functions of the moving
parts.
q Check the function of the brakes.
q
Check the locking function(s) of the side rails.
5.5 Cleaning and disinfection
IMPORTANT!
Wrong fluids or methods can harm or damage
your product.
– Follow instructions carefully for either
Non-washable or Washable components.
– Never use corrosive fluids (alkalines, acid,
cellulose thinner, acetone etc)
– Never use a solvent that changes the structure
of the plastic or dissolves the attached labels.
– Always make sure that the bed is carefully dried
before taking it into use again.
5.5.1 Cleaning methods
Electrical components
IMPORTANT!
Non-washable electronics can not withstand high
temperatures.
– Do not wash or dry in higher temperatures
than 40 °C.
Method: Wipe off with a wet cloth or soft brush.
Max. temperature: 40 °C
Solvent/chemicals: Water
Metal components
Method: Wipe off with a wet cloth or soft brush. Water
may be pressurized, but not high pressure or steam.
Max. temperature: 40 °C
Solvent/chemicals: Household detergent or soap and water,
6-8 pH
Wood (including textile straps on side rails, if existing)
Method: Wipe off with a wet cloth or soft brush.
Max. temperature: 40 °C
20 1561872-F