5 USAGE
Invacare® Adjustable ASBA Seats
34
Part No 1143192
Using the CMPJ+ Joystick
1.
Make sure the wheelchair is on a level surface.
2.
Select a drive that has the Actuator Control Switch Mode icon
displayed.
3.
Select the Actuator Control Switch Mode icon (Detail “A”).
4.
Four of the following icons will display when Actuator Control
Switch Mode is selected:
5.
Select the desired operation using the joystick or an equivalent
switch.
For this procedure, refer to FIGURE
3 on page 35.
The drive select toggle switch is located on the left
side, below the LCD. The drive select position is
momentary, meaning that it will return to the
neutral position after a selection is made.
The location of the icons indicates the joystick
direction or quadrant (Detail “B”).
The three icons indicate up/down, up or down,
respectively.
ICON
DESCRIPTION
Tilt Operations
Combined Power Leg Operations
Right Leg Operations
Left Leg Operations
No powered seating operation has been
programmed for this quadrant.
While operating the powered seating system, the
selected icon will display on the screen along with
text indicating the current operation (Detail “C”).
