Invacare Action 4NG series, Руководство пользователя

Страница: 27 / 72

Components and their functions
WARNING!
Risk of injury
– Always make these adjustments before the
user settles down in the wheelchair to prevent
injuries.
– Invacare strongly recommends the use
of anti-tippers (available as an option) in
combination with all rear wheel positions when
you use your backrest with an angle of 12°
and more
IMPORTANT!
– Push on the backrest canes before operating
the levers, this is to release the auto-locked
security system.
1. Release the auto-locked system by pushing on the
backrest canes.
2. Simultaneously pull the levers
A
to provides the same
angle on both sides.
3. Release the levers when you reach the desired angle.
3.7 Standard backbrace for the backrest
The backbrace links the two push handles, provides tension
to the backrest upholstery and must always be in position
on recliner versions.
CAUTION!
– Do not use the backbrace to push the
wheelchair. The backbrace is not a push bar!
– Do not attempt to lift the wheelchair using
the backbrace; it may come loose and it could
break.
– Keep your fingers away from movable parts
and sharp edges to prevent injuries.
Folding the backbrace
1. Slightly loosen the two hand screws
A
, pull up the
backbrace B and swivel it downwards along the
backrest (on right or left hand).
2. Fold the backbrace B until it is in vertical position.
1640502-B
27