1 4
SECTION 3—ARMRESTS
S E C T I O N 3 — A R M R E S T S
W A R N I N G
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may occur.
Removing/Installing Swing Away Armrests
Removing/Installing Swing Aw ay Armrest
NOTE: For this procedure, refer to FIGURE 3.2.
Removing Swing Away Armrest
1.
Unlock existing armrest assembly by operate the push pin
.
2. Swing back on the existing armrest to remove from the front arm socket.
3.
Remove armrest by operate the rear push pin
.
4. Repeat STEPS 1
-
3 for opposite side of wheelchair, if necessary.
