SECTION 4—SEAT/BACK
1 5
Installing/Removing the Back brace
W A R N I N G
If a back brace is already installed, you don’t have to re-install the back cane
inserts (for fixed backrest canes only).
After ANY adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may occur.
NOTE: For this procedure, refer to FIGURE 4.5.
NOTE: To remove the back brace, reverse this procedure.
1. Remove the end caps from the back canes.
2. Remove the handles from the back canes.
3. Install the inserts into the canes (fixed backrest canes only).
4. Secure the inserts with mounting screws (fixed backrest canes only).
5. Install the handles on the back canes.
6. Align the back brace ends with the handles of the back canes.
7. Secure the back brace to the back canes with the mounting bolts.
Mounting Bolts
Handle
Back brace
Back Canes
FIGURE 4.5 Installing/Removing the Back brace
