Invacare 1110154 Скачать руководство пользователя

Страница: 3 / 4

INSTALLING THE TELESCOPING TUBE (FIGURE 2)

NOTE: The support bracket must be mounted to the wheelchair BEFORE installing the telescoping

tube.

1. Insert the telescoping tube into the support bracket.
2. Rotate the telescoping tube until the mounting holes at the bottom align with the mount-

ing holes in the support bracket.

NOTE: The adjustment knob should point towards the outside of the wheelchair.

3. Install the short hex screw and small locknut to secure the telescoping tube to the

support bracket. Torque to 120 in/lbs.

4. Adjust I.V. rod to desired height. Refer to ADJUSTING THE I.V. ROD HEIGHT in this

instruction sheet.

FIGURE 2 INSTALLING THE TELESCOPING TUBE/ADJUSTING THE

I.V. ROD HEIGHT

ADJUSTING THE I.V. ROD HEIGHT (FIGURE 2)

1. Loosen the adjustment knob.
2. Adjust I.V. rod to desired height.
3. Securely tighten adjustment knob.

Telescoping

Tube

Short Hex

Screw

Support

Bracket

Small Locknut

Mounting

Hole

Adjustment

Knob

Telescoping

Tube

NOTE: Rear wheel not shown

for clarity.

Содержание 1110154

Страница 1: ...install this equipment otherwise injury or damage may occur DO NOT pull push the wheelchair by the I V rod assembly Injury to the assistant occupant and or damage to the I V rod assembly may occur DO...

Страница 2: ...e EXISTING hex screw is replaced by the long hex screw contained in this kit 6 Install the NEW long hex screw through the clevis and reclining back tube 7 Install the washer EXISTING spacer removed in...

Страница 3: ...eelchair 3 Install the short hex screw and small locknut to secure the telescoping tube to the support bracket Torque to 120 in lbs 4 Adjust I V rod to desired height Refer to ADJUSTING THE I V ROD HE...

Страница 4: ...atheson Blvd E Unit 8 Invacare is a registered trademark of Elyria Ohio USA Mississauga Ontario Invacare Corporation 44036 2125 L4Z4G4Canada Yes you can is a trademark of Invacare 800 333 6900 800 668...