Section
2
:
Installation Instructions
Version 1.0
3
Intuicom, Inc.
2 Installation Instructions
Below is the installation Diagram for the recommended installation of the Intuicom RTK
Bridge–X utilizing the equipment noted above.
Diagram 1
2.1 Configuration
•
Configure the Intuicom RTK Bridge–X to connect to GPS/GNSS Reference network
and obtain CMR/CMR+ or RTCM correction data stream from an appropriate single
reference station, such as a VRS.
•
Configure the resulting RTK correction data to be output at a known baud rate (a
baud rate of 38400 is recommended).
•
Confirm GPS and cellular antenna (typically a combined antenna with two coaxial
cables with TNC connectors) are connected and placed where they have good sky
view and good cellular signal.
