Intrinsyc Open-
Q™ 605 SBC User Guide and HW Specification
V. 1.4
35
Copyright Intrinsyc Technologies Corporation
coax connector for GPS (J3100) is located on the bottom side of the SBC. Table 3-20 below
outlines the mating connector that can be used to attach an external antenna to the GPS antenna
connector. It is important to note that GPS should be used or tested near a window or an open
location where satellites can pass above the device.
Table 3-20 – GPS antenna connector details
Parameter
Value
Notes
Connector type Hirose H9161CT-ND U.FL SERIES
Port impedance
50 ohms
3.14
Micro SD Card (J2400)
Figure 14: micro SD card port (J2400)
Standard Micro SD Cards can be inserted at connector J2400 located on the top side of the SBC.
This is a push/push type connector.
3.15
USB Type C Connector (J3300)
Figure 15: USB Type-C Connector (J3300)
