Open-Q™ 2500 Development Kit User Guide
Version 1.1
19
Copyright Intrinsyc Technologies Corporation
3.7.6
User Buttons and LEDs
There are four user buttons and four LED’s on the Open-Q 2500 development kit. Following is the
information regarding the User Buttons:
User Button
Function
S1100
Use this button to control or increase the volume.
S1102
Volume -
Use this button to control or decrease the volume.
This button can also be used to reset the board.
S1101
GP Switch
This is a general-purpose user button.
S1103
Power ON
Use this button to power on the 2500 development
kit.
Following is the information regarding the User LED’s:
LED
Function
DS1100 Yellow LED
General purpose LED
DS1101 Blue LED
General purpose LED
DS1102 Red LED
This LED indicates charging (NOTE: not functional
in REV1 of carrier board)
DS1103 Green LED
This LED indicates power
