3
Operation
Installation
87
85
86
87a
NA
30
To ACC Input of Camera
GND
Vehicle
Reverse Lamp Wire
ACC Input
(From Vehicle)
Mirror
Camera
Black-Ground
Video 2 (To Camera)
Video 1 (Additional Input)
Black-Ground
Red-Accessory
Red-From 87 of Relay
RCA Output to Video
2 Input of Mirror
1. Video 2 (Reverse) will appear automatically when the input senses a signal
2. Video 1 (if used) can be accessed by long-pressing the REC button (about
2s)
3. When vehicle is powered on, the monitor will turn on automatically and
begin recording. To stop recording, short press the REC button.
4. To turn off the monitor, press the PWR button (center button) for 1s. If
the system was recording, it will continue to do so. To turn the unit off
completely, long press the PWR button for about 4s.
5. Use the MENU button enter the sub-menus for the DVR, V1, and V2 sources
6. Use the < Arrow > buttons to navigate sub-menus, and to zoom in photo
taking mode.
1. Remove OEM mirror and replace with supplied LCD mirror.
2. Run your wiring harness into the headliner and down the vehicles A-Pillar, making sure to
avoid any factory airbags. Secure your wiring with zip-ties.
3. Make all necessary wiring connections (See wiring diagram - make sure to use a relay)
