User Manual
jetSpeed 520
Getting Started
Ver.1.0
10/03
page 8 / 84
1.5 MANAGEMENT
jetSpeed 520 supports simple, flexible and easy-to-operate methods for
management purposes. jetSpeed 520 can be managed via the following
paths:
•
Console port:
Use a RS-232 cable for connecting jetSpeed 520 to a
terminal or a PC running a terminal emulation program, such as Hyper
Terminal. (For further details, see paragraph 1.8 Console Setup)
•
Local Ethernet Port (Telnet):
Connect the Ethernet port to your local
network or to directly to a PC. From the command window type "telnet
192.168.1.1".
•
Local Ethernet Port (Web Browser):
Connect the Ethernet port to
your local network or directly to a PC. Start the web browser and enter
default local Ethernet IP address "
192.168.1.1
" on the address bar.
•
Remote Management:
While jetSpeed 520 is running, you can
remotely type “telnet <wan address>” from a workstation, which is
connected to a ADSL network or in general on the Internet.
NOTE:
As operating an ADSL device requires technical know-how and
experience. It is recommended that only qualified technical staffs manage the
jetSpeed 520. Therefore, a password authentication is required when you
enter the web interface. To obtain the password, see paragraph 1.6 Default
Values.
