www.inline-info.com
4
1. GENERAL INFORMATION
VALIDITY:
This user manual applies to the following product: 32316H InLine® PoE+
Gigabit Network Injector Hub 16 Port
MANUFACTURER:
INTOS ELECTRONIC AG
Siemensstraße 11
D-35394 Gießen
DATE:
February 2020
2. CONTENT OF DELIVERY
•
1x InLine® PoE+ Gigabit Network Injector Hub 16 Port
•
2x User manual (German/English)
•
1x Power cord
•
2x 19“ mounting brackets
•
6x Screws for the mounting brackets
•
4x Rubber feet
Please check the content of delivery for completeness. If individual compo-
nents are missing, please contact your dealer.
3. EXPLANATION OF WARNING SYMBOLS AND
NOTES
4. TECHNICAL CHARACTERISTICS
•
Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab
1000Base-T, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over
Ethernet Plus
•
Ports „DATA IN“: 16x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X
•
Ports „DATA + PWR OUT“: 16x 10/100/1000Base-T RJ45, Auto-MDI/
MDI-X
•
PoE type of power supply: end-span
•
PoE output voltage: per port 48~56V DC
•
PoE output power: per port max. 30 watts
•
Power pin assignment: 1/2(+), 3/6(-)
•
Total power: 250 watts
•
Active cooling by two built-in fans
•
Noise level maximum 35.1dB under full load at a distance of 50cm
•
LED indicators: PWR, PoE (1-16)
•
Dimensions (W x D x H): 358x205x44mm
•
Weight: approx. 2.4 kg
•
Power requirement: 100~240V AC internal power adapter
•
Operating environment: operating temperature 0-40°C, storage tempera-
ture -10-70°C, humidity 20-95% non-condensing
5. INTENDED USE
The InLine® PoE+ Gigabit Network Injector Hub is a fast and flexible solution
for upgrading the existing network to the Power over Ethernet system IEEE
802.3af / IEEE 802.3at without replacing existing switches. The injector hub
provides triple protection against overcurrent, overvoltage and overheating
at each port. In addition, the Injector Hub offers both IEEE 802.3af PoE and
IEEE 802.3at PoE+ with up to 30 watts of power per port via a single Cat. 5
/ 5e / 6 Ethernet cable with a combined total power of 250 watts. Sixteen
10/100/1000MBit/s PoE+ ports solve the problem of a limited number of avai-
lable sockets and offer system administrators a flexible solution for operating
the network device to be supplied with power, such as PoE-capable IP came-
ras or wireless access points, almost everywhere.
General warnings:
•
Do not expose the InLine® PoE+ Gigabit Network Injector Hub to
extreme heat
•
Protect from dust and moisture
6. IMPROPER USE
The following shall be deemed to be improper use within the meaning of a
foreseeable misuse:
•
Do not disassemble the InLine® PoE+ Gigabit Network Injector Hub
7. APPLICATION / COMMISSIONING
Hardware installation
1.
Plug the supplied power cord into the „AC IN“ jack of the device and the
other end into a power outlet. The „PWR“ LED lights up.
2.
Connect an RJ45 cable from the „INPUT IN“ of the injector hub to the
Ethernet port of the existing switch.
3.
Connect your IEEE 802.3af / at PoE-enabled device to the injector hub‘s
„DATA + PWR OUT“ port and it will automatically provide power over that
port. The LED indicator „PoE“ lights up for confirmation.
CONTENT
1.
General information
2.
Content of delivery
3.
Explanation of warning symbols and notes
4.
Technical characteristics
5.
Intended use
6.
Improper use
7.
Application / commissioning
4-5
8.
Maintenance and cleaning
9.
Accessories
10.
Disposal
11.
Disclaimer
NOTE!
This symbol indicates information that contributes to a bet-
ter understanding.