·
Make sure the position and size of the creasing first, if only one piece of creasing
is needed, fix the position of left-side Slide Positioning Model according to the
creasing size.
·
If two piece of creasing is needed, i.e. book spine creasing and reading creasing
make sure the position of book spine creasing first, move the right-side Slide
Positioning Model to that position and fix, then move the left-side Slide Position
model to correct position and fix according to the reading creasing size and
position.
When moving the Slide Positioning Model, please hold its head up and
move the model parallelly. Please don
’
t move when its head on the
vernire, in case any damage occurred to the model suit or vernire.
When moving the Slide Positioning Model to the needed position, please
push its head there, and fixed the screws manually, then the model is
fixed there, in case the creasing position is not exact.
·
When the Slide Positioning Model is fixed in the need position, put down the
creasing papers from Mechanism core protection cover and rely it on the fixed
Slide Positioning Model back side.
·
If only one piece of creasing is needed, move the paper rightward, and rely it on
the fixed right-side Slide Positioning Model right side. Step onto the step switch,
wait until the machine stops and take out of creasing paper. Creasing is ready.
·
If two piece of creasing is needed, move the paper rightward first, and rely it on the
fixed right-side Slide Positioning Model right side. Treat the foot pedal, wait until
the machine stops and then move the paper leftward, rely it on the left-side Slide
Positioning Model left side. Treat foot pedal again, wait until the machine stops
and take out of creasing paper. Creasing is ready.
6.2 Perforating Operation Instructions
Important Note:
Using the suitable perforating blade system according to the thickness of the paper to
make the perfect perforating effect. If the perforating blade system is not suitable for
the paper may cause bad perforating effect or even damage the perforating blade
system.
intimus CR-460 ECP
7
7
