21
www.intipv.com
MANUAL DE USUARIO INVERSOR TECA LITIO / USER MANUAL INVERSOR TECA
LITIO
L
CD
SCREEN SETTINGS
Program
Description
Selection option
00
Exit setting mode
Escape
01
Output source priority: configure the
load power of the source priority.
Grid priority (default)
The grid will supply energy to the loads as a priority.
The battery will supply energy to the loads only when the grid
is not available.
Battery priority
The battery will supply energy to the loads as a priority.
The grid will supply energy to the loads only when the voltage
level of the batteries drops to a low-level warning voltage or
the setting point in the program is 12.
Operation mode information
Indicates that the unit is connected to the grid.
Indicates that the load is supplied by the grid.
Indicates that the grid charging circuit is working.
Indicates that the DC/AC inverter circuit is working.
Mute operation
Indicates that the alarm is disabled.
After pressing and holding the “ENTER” button for 3 seconds, the unit will enter the setting mode. Press the buttons “UP” or “DOWN” to select the
setting programs. Then press the button “ENTER” to confirm the selection or the button “ESC” to exit this mode.
.
After setting the output frequency, the output voltage, the charging current and the AC voltage range, it is necessary to disconnect and restart
the inverter.
