128
SAVE THESE INSTRUCTIONS
Page 12
(128) MODEL SF20220R SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 09/08/2009
English
4.
In a clockwise motion screw filter housing nut
(16)
onto the motor water inlet
(See drawings 12.1 & 12.2)
.
5.
Replace the basket
(15)
and leaf trap cover
(13)
back to the pre-filter housing
(See drawings 13.1 & 13.2)
.
12.2
SETUP INSTRUCTION (continued)
12.1
13.1
13.2
S
E
T
U
P
IN
S
T
R
U
C
T
IO
N
S
Sand tank installation:
1.
Place the tank on the selected location.
2.
Connect the motor pre-filtering assembly unit to the tank support base
(See
drawing 14.1)
. NOTE: Ensure the pre-filter housing water inlet hose connection
is facing towards the pool.
IMPORTANT: Some countries, especially in the European community,
require the product to be secured to the ground or to a base in a
permanent upright position. Check your local authorities to determine if
there is a regulation in your area regarding above-the-ground swimming
pool filter-pumps. If yes, then the product can be mounted to a platform
using the two holes located in the base. See drawing 14.2.
The product can be mounted on a cement base or onto a wooden
platform to prevent accidental falling over.
•
The mounting holes are 6.4 mm in diameter and spaced 117.4 mm
apart.
•
Use two bolts and lock nuts with a maximum of 6.4 mm in diameter.
14.1
14.2
117.4 mm
