background image

263

PO

S  AVE THESE INSTRUCTIONS

(263PO)  SPA  ENGLISH  7.5” X 10.3”  PANTONE 295U  07/16/2014

English

WARRANTY

Your PureSpa has been manufactured using the highest quality materials and workmanship. 
All Intex products have been inspected and found free of defects prior to leaving the factory. 
This Limited Warranty applies only to the PureSpa listed below.

The provisions of this Limited Warranty apply only to the original purchaser and is not    
transferable. This Limited Warranty is valid for the period noted below from the date of the 
initial retail purchase. Keep your original sales receipt with this manual, as proof of purchase 
will be required and must accompany warranty claims or the Limited Warranty is invalid. 

 

PureSpa Warranty – 1 Year 

If a manufacturing defect is found within the periods noted above, please contact the           
appropriate Intex Service Center listed in the separate “Authorized Service Centers” sheet. 
The Service Center will determine the validity of the claim. If the Service Center directs 
you to return the product, please carefully package the product and send with shipping and  
insurance prepaid to the Service Center. Upon receipt of the returned product, the Intex 
Service Center will inspect the item and determine the validity of the claim. If the provisions 
of this warranty cover the item, the item will be repaired or replaced at no charge.  

Any and all disputes regarding the provisions of this Limited Warranty shall be brought before 
an informal dispute settlement board and unless and until the provisions of these paragraphs 
are carried forth, no civil action may be instituted. The methods and procedures of this 
settlement board shall be subject to the rules and regulations set forth by the Federal Trade 
Commission (F.T.C.). IMPLIED WARRANTIES ARE LIMITED TO THE TERMS OF THIS 
WARRANTY AND IN NO EVENT SHALL INTEX, THEIR AUTHORIZED AGENTS OR 
EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR 
CONSEQUENTIAL DAMAGES OR LIABILITIES. Some states, or jurisdictions do not allow 
the exclusion or limitation of incidental or consequential damages, so the above limitation or 
exclusion may not apply to you. 

 

This Limited Warranty does not apply if the products are subject to negligence, abnormal use 
or operation, accident, improper operation, improper voltage or current contrary to operating 
instructions, or to damage by circumstances beyond Intex’s control, including but not limited 
to, ordinary wear and tear and damage caused by exposure to 

fi

 re, 

fl

 ood, freezing, rain, or 

other external environmental forces. This Limited Warranty applies only to those parts and 
components sold by Intex. The Limited Warranty does not cover unauthorized alterations, 
repairs or disassembly by anyone other than Intex Service Center personnel.

DO NOT GO BACK TO THE PLACE OF PURCHASE FOR RETURN 
OR REPLACEMENT. IF YOU ARE MISSING PARTS OR NEED 
ASSISTANCE, PLEASE CALL US TOLL-FREE (FOR U.S. AND 
CANADIAN RESIDENTS): 1-800-234-6839 OR VISIT OUR WEBSITE: 
WWW.INTEXSTORE.COM.

 

Proof of Purchase must accompany all returns or the warranty claim will be invalid.

Page 20

Содержание PureSpa SSP-H-10-1





















Отзывы: