114
SAVE THESE INSTRUCTIONS
Page 9
(114) ELECTRIC POOL HEATER ENGLISH 7.5” X 10.5” PANTONE 295U
12/18/2006
ELECTRIC POOL HEA
TER ST
A
TIONAR
Y MOUNTING OPTION
ELECTRIC POOL HEATER STATIONARY MOUNTING OPTION
Some countries, especially in the European community, require the electric
pool heater to be secured to the ground or to a base in a permanent upright
position. Check your local authorities to determine if there is a regulation in
your area regarding above-the-ground swimming pool electric pool heaters.
If yes, then the electric pool heater can be mounted to a platform using the
two holes located in the base. See drawing below.
The electric pool heater can be mounted on a cement base or onto a
wooden platform to prevent accidental falling over. Total assembly must
exceed 18kg. The European norm EN 60335-2-41 requires this product be
secured to the ground or to a base.
1. The mounting holes are 6.4mm in diameter and spaced 156 mm apart.
2. Use two bolts and lock nuts with a maximum of 6.4 mm in diameter.
156 mm
