(307IO) MODEL HP3220 HEAT PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 10/10/2017
English
307
IO
SAVE THESE INSTRUCTIONS
English
Page 6
PRODUCT SPECIFICATIONS
• Pump and pool must be installed and fi lled with water prior to installation. Two adults required.
• Tools required: one adjustable wrench, one Philip screwdriver.
• The unit will work properly as long as the following three elements are present:
1. Fresh air 2. Electricity 3. Swimming pool water
(Unit: mm)
752
485
24
260
96
131.5
270
290
560
752
*Measured Condition at 27°C Ambient Air, 27°C Water
Heat Output
4.1 kW (13,911 Btu) / hr
Power Consumption
0.78 kW (2,646 Btu) / hr
Coeffi cient of Performance (COP)
5.2
*Measured Condition at 15°C Ambient Air, 26°C Water
Heat Output
3.1 kW (10,518 Btu) / hr
Power Consumption
0.75 kW (2,544 Btu) / hr
Coeffi cient of Performance (COP)
4.1
General Data
Voltage / Frequency / Phase
220 - 240 V / 50 Hz (with in line RCD) / 1 PH
Rated current
3.5 A
Advised fuse
16 A
Recommended pool water capacity
5 - 11 m³
Required system water fl ow rate
1.8 - 10 m³/hr
Maximum water pressure (excluding bypass kit / hoses)
0.4 MPa
Water pressure drop
15 kPa
Operating water temperature range
15°C - 35°C
Operating air temperature range
8°C - 40°C
Class of protection
I
Type of protection
IPX4
Heat exchanger
Titanium inside a PVC reservoir
Compressor / refrigerant type
Rotary / R410A
Refrigerant gas quantity
0.5 kg
Inlet / outlet fi tting size
38 mm hose with collar nut
Noise level at 1 m
48 dB(A)
Fan input power
68 W
Fan speed
830 - 870 RPM
Global warming potential (GWP)
2088
CO
2
Equivalent
0.95 T
Weight Net / Gross
33 / 40 kg
Dimension
780 x 340 x 485 mm
* Pool covered with a solar pool cover
This heat pump only has heating fuction.
Contains fl uorinated greenhouse gases. Fluorinated greenhouse gases are contained in
hermetically sealed equipment.
