Learning Mode:
Automatic configuration of the IR wireless remote controller
1- Push IH button for 3 seconds. The LED will turn into white steady
2- Pick up the IR controller and push the On/Off button pointing to the
IntesisHome Universal device.
-
If process is not ok, the IntesisHome device LED will be blinking Red.
*Repeat the process from Step 1 and check our compatibility list.
-
If process is OK, the IntesisHome device LED will be blinking green.
Manual Mode:
Manual configuration of the IR wireless remote controller
1- Go to settings/device section and press “Manual Mode”
2- Select your AC brand and model.
Location
- IR configuration
