IntesisBox IBOX-BAC-MBRTU-100, Руководство пользователя

Страница: 14 / 27

IntesisBox
®
BACnet/IP Server - Modbus RTU Master
User’s Manual r14 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SL
URL
Email
tel http://www.intesis.com
info@intesis.com
+34 938047134
14 / 27
5. LinkBoxBacnet. Configuration & monitoring of IntesisBox BACnet
series
How to install and use the LinkBoxBacnet is explained in its Manual. It can be found in the
installation folder (if the Software is already installed) or it can be downloaded from the link
that can be found in the installation sheet supplied with the IntesisBox.
In this section only the specific project configuration for IntesisBox BACnet/IP Server -
Modbus RTU Master is going to be explained.
The External Protocol in this IntesisBox is Modbus
5.1 Project configuration
To configure the integration connection parameters, and the points list, click on
Config in
the Button Bar ( Figure 5.1 ). The Modbus Configuration window will be opened. For
integrations with a large number of points an alternative CSV based configuration method is
explained in the LinkBoxBacnet Manual.
Figure 5.1 Menu and Button Bar in LinkBoxBacnet
5.1.1 Connection configuration
Two subsets of information are configured using this window, the BACnet/IP parameters of
the IntesisBox, and the parameters of the Modbus interface.