Intesis
Box
®
ASCII Server
– KNX
User Manual r1.0 EN
© Intesis Software S.L.U. - All rights reserved
IntesisBox
is a registered trademark of Intesis Software SLU
14/20
email:
web:
phone: +34 938047134
5.2.3 Configuration tab
Select the
Configuration
tab to configure the connection parameters. Three subsets of information are shown in this
window: General (Gateway general parameters), ASCII (ASCII interface configuration) and KNX (KNX TP-1 interface
configuration).
Figure 5.2
IntesisBox MAPS configuration tab
General
parameters are explained in IntesisBox MAPS user manual for IntesisBox ASCII Server Series.
5.2.3.1 ASCII Configuration
Set the parameters for connection to ASCII device.
Figure 5.3
IntesisBox MAPS configuration tab for ASCII Server