Doc 0219660 rev. K
Page 17 of 32
Not subject to issue control when printed
Power Dome Tool
p/n 15989900
As the HP rec is pushed
into the power dome,
carefull pull out the
power dome tool
Place the longer length of the rectangular cavity of the power dome over
the power dome tool
Ensure that the power dome is installed on the power dome tool by checking
it and it is flushed even with the tool as shown (3rd pic)
Squeeze and hold bottom of the power
dome tool to open the power dome rect-
angular cavity.
Insert the HP rec, with the longer length of
the rec parallel to the longer length of the
rectangular cavity of the power dome
Prepare a HF3
tool with HF3
Insert HF3 tool with HF3 all the way in the power dome until it passes
through the rectangular cavity of the power dome
Power Dome Tool (HP 2 pin rec)
