5
www.intertest.com
Operating Manual
Operating Manual
www.ushio.com
5
System Description and Operation
1. The light source power switch should be in the OFF position. Plug the
external 12vdc power supply into the 12vdc connector.
Figure 1.
2. Plug the external power supply cord into AC receptacle main power.
3. Plug the fiber-optic bundle into the light port and connect the opposite
end to the equipment being used.
Figure 2.
4. Rotate the front turret so that the light port is either in front of the
UV
or the
VIS
LED depending on your desired output. You will feel a click
when the port is in the proper position.
5. Turn the power switch to the ON position. LED indicator light will turn
on when light source is powered.
Figure 3.
6. Adjust the intensity control to set the light intensity to the desired light
output level.
Figure 3.
7. Turn unit OFF when not in use.
Figure 3.
8. This unit is equipped with a fiber sense interlock feature. The device
will not emit light unless fiber cable is completely inserted into the front
adapter. Please ensure fiber cable is fully seated into light port and that
the front turret is positioned in front of either the
UV
or
VIS
output.
12vdc
Power Plug
Light Intensity
Knob
Light Port
ON/OFF Indicator
Figure 1. Back View
Figure 2. Fiber-Optic Bundle
Figure 3. Front View
Power ON/OFF
Rotate Knob
Front Turret
Rotate turret to select
UV or visible output
Содержание iShot UV/White LED Light Source Kit
Страница 1: ...UV White LED Light Source Kit...
