12
Manual Focus Mode
The lens focus can be adjusted manually by slide bar on control panel of web client
Focus adjustment speed can also be selected by client UI
Auto Focus Mode
An AF icon is located on control panel to allow user enable or disable auto focus
function;
The Auto Focus (AF) function automatically adjusts the focus position to maximize
the high frequency
content of the picture in a center measurement area, taking into consideration the
high luminance
and strong contrast components.
Preset:
Up to 256 preset points can be freely defined by user with configurable pan/tilt position, zoom ration
and focus stop; user can easily manipulate P/T/Z/F control by control panel, then click “SET” to
memorize specific preset points, or ”GO” to reach desired preset destination.
Auto Patrol:
$llows user to combine several preset points as patrol tour which can automatically handle
preset “GO” by pre-defined sequent order and dwell time
Up to 24 sets patrol paths can be independently configured, each supports maximum 256 preset
points inside.
Auto Scan:
Auto Scan stands can automatically move horizontally between two pre-defined specific
preset points; user can set left and right boundary on UI and click AS icon on panel to start this
feature.
Day & Night Setting:
B series supports variety day/night modes:
Force to Day Mode
The built-in ICR will be always enabled to filter IR long-wave light and sensor is in
color mode
