www.intertec.info
Operating Instructions CP MICROTHERM DC.A
Page 4 / 12
HOM225729419Ien-3
INTERTEC-Hess GmbH · Raffineriestr. 8 · 93333 Neustadt/Donau · Germany ·
+49 9445 9532-0 · [email protected]
CAUTION
NOTICE
This sign is warning about a hazardous situation which,
if not heeded, may lead to slight, reversible injury.
NOTICE
NOTE
It is essential to pay attention to this safety advice as you
may otherwise incur material damage.
INFO
Important notes and useful additional information.
5
Safety information
CAUTION
Risk of injury at the rib ends
The sharp edges on the heating ribs may cause injury if
handled incorrectly.
CAUTION
Risk of burns from a hot surface
Attainable highest temperatures:
- Max. 160°C with T3 heating systems
- Max. 100°C with T4 heating systems
- Max. 70°C with T5 heating systems
- Max. 50°C with T6 heating systems
Do not touch device during operation! Before working on
the device, allow it to cool down first.
6
Installation accessories
The following are included in the scope of delivery:
Piece
Description
1
Heating unit
1
Angle bracket made of flat steel
1
Packet of screws containing the following:
2
Hexagon bolts M 6x12
Piece
Description
1
T-head bolt type 28/15, M 6x15
2
M6 flat square nut
1
Washer shape A 6.4
2
Lock washers shape J 6.4
1
M6 hex nut
If one of the components listed here is not included in
the scope of delivery, then please contact the manufac-
turer.
7
Technical Data
Protection class
IP66/IP68 1bar/30min
Rated voltage
max. 250 V AC
Permitted operating voltage
max. 250 V AC
Rated current (in compli-
ance with VDE 0298)
max 10 A
Ambient temperature
- 60 to + 80 °C
Max. permitted operating
temperature
- 60 to + 180 °C
Switching capacity of fault
alarm (AM)
10 A / 275 V AC
Connecting cable
Silicone hose cable,
notch- and oil resistant, 3
x 1,0 mm² Ø8,5 mm
Connecting cable AM
Silicone hose cable,
notch- and oil resistant, 3
x 1,0 mm² Ø8,5 mm
Material
Seawater-proof alu-
minium, black anodized
Mean Time Before Failure
50.000 h
Storage temperature
- 60 to + 80 °C
Special voltages with corresponding power adjustment
and component selection are possible.
Profile type "N" Height x
Width x Depth
155 x 50 x 50
mm
INFO
You will find the precise technical data for your in-
strument on the label.
