www.intertec.info
Operating Instructions CP MEGATHERM D.A HI
HOM160989579Ien-1
Page 3 / 7
INTERTEC-Hess GmbH · Raffineriestr. 8 · 93333 Neustadt/Donau · Germany ·
+49 9445 9532-0 · [email protected]
1
General
These operating instructions describe the safe and
proper way to work with the device. The safety informa-
tion and instructions given as well as the local accident
prevention regulations and general safety regulations
valid in the area of application must be complied with.
These instructions are a constituent part of the instru-
ment and need to be kept in the immediate vicinity of the
device accessible to personnel at all times.
Before starting any work, the operating instructions
should be read in full.
2
Use
The CP..THERM heaters are manufactured according to
Directive 2014/34/EU and are licensed for direct heating
through flange-mounting (conduction) or for room heat-
ing (convection) in Ex-zone 1 and Zone 2 for instrument
categories G/ D in temperature classes T3 to T6. You
will find the temperature class for your device on the la-
bel. See
Technical Data [
}
Page 4]
section.
The areas of application are:
• Frost protection
• Condensation protection
• Maintaining temperature
The standard design has a room thermostat integrated in
the connecting cable for frost protection applications or a
safety thermostat for maintaining temperature. If a TAE
is used, the respective operating instructions must be
complied with.
The SMART HEATER HI SYSTEM is used for demand-
ing heating tasks in explosive areas to maintain high
temperatures in analytical instruments. The temperature
controller TC connected to the electrical heater has a
temperature sensor in the heating coil serving as a tem-
perature limiter.
EC type examination certificates PTB 02 ATEX 1041 X
with appendices and supplements in German and Eng-
lish, as well as IEC Scheme Certificate IECEx PTB
07.0052X.
See
http://www.intertec.info
3
Explanation of symbols for warnings
and signal words
The safety information warns the user about risks and
provide information on how risks can be avoided.
Safety information can be found at the start of the
chapter before the instructions which may lead to a haz-
ardous situation. Additional safety information can be
found at the beginning of this manual.
Safety instructions which must be adhered to are high-
lighted as follows:
DANGER
DANGER
This sign is warning about an extremely hazardous situ-
ation which, if not heeded, will lead to death or serious ir-
reversible injury.
WARNING
WARNING
This sign is warning about a hazardous situation which,
if not heeded, may lead to death or serious irreversible
injury.
CAUTION
NOTICE
This sign is warning about a hazardous situation which,
if not heeded, may lead to slight, reversible injury.
NOTICE
NOTE
It is essential to pay attention to this safety advice as you
may otherwise incur material damage.
INFO
Important notes and useful additional information.
4
Safety information
CAUTION
Risk of injury at the rib ends
The sharp edges on the heating ribs may cause injury if
handled incorrectly.
