9
Use Restart to reload the current selected profile into the main display. Note this will
only work if the timer is paused or stopped. The Flash button causes the main display
to Flash. Note this cannot be used together with the On/Off button.
Programming Memory
In the top left corner of the main screen there are 4 icons for Countdown, Countup,
Memory and Tools. To change from countdown to countup you must pause or stop
the timer. The Memory and Tools buttons are immediate. The Memory page uses
containers on the right side of the screen. Select which one of the 4 memories you
want to edit, select count up or down. On the left select a container to edit the time,
enter a new time and push the container again to save that time. Push Load to run the
selected Memory.
Tools
The Tools screen allows setting the time of day and time format. Use the Set Time of
Day button to enter time of day edit mode.
You can enter time in 12 or 24 hour format. Once complete push the Store button.
Use the Time to Day button to show the time in the main display. Use the Count Past
Zero button to keep counting down after 00:00 with negative time.
In addition, you can turn off key-click and finally, the Tools screen also provides ac-
cess to the help screens.
Environmental
WEEE and RoHS2 Compliance. CountDown Touch and its associated accessories
have been manufactured and sold in accordance with the requirements of the ECEE
and RoHS2 directives. Please return all end-of-life items to your supplier, or your local
Interspace Industries representative directly, for appropriate disposal.
Packaging Materials:
Cardboard box: Grade 150K/T ‘B’ (Single Walled Corrugated- Brown Kraft)
Protective Foam: Grade HLB 22 Grey Foam (High Load Bearing)
