
IS-1500 User Guide
Thales Visionix, Inc.
MNL- 0024 (D)
Page 41 of 59
B. To playback a log file, follow the steps below.
1.
If they are currently running, close the sfHub and sfStudio programs.
2.
If planning on using sfStudio to view data while the log is replaying, follow these added steps.
a.
Auto Launch for sfHub will need to be disabled by following the instructions in the sfStudio.ini section.
b.
Open sfStudio and any data displays to be viewed during playback. Drag each display tab into its own window, as
clicking around during playback is inadvisable.
3.
Open the sfHub.info file.
4.
Under the General section, set appMode
2
.
General
{
appMode
1
; (1) Tracking (2) Playback (3) Configuration Utility
numSensors 1
; (1) Min (4) Max
verbosity 0
; (0) Low (1) Med (2) High
5.
In order to allow the image transfer streaming, under the Communication section, set imgTx
1
.
Communication
{
Master
{
; Serial port for sensor connection
; Windows - COMx
; Linux - /dev/ttyACMx
; AutoDetect - auto
serialPort auto
imgTx
1
; (1) Enable image transfer
imgTxMode 1
; (1) Shared mem (2) UDP
tcpPort 51717
; TCP port for communication with sfAccess
6.
Save and close sfHub.info.
7.
Run the sfHub program manually from the same folder sfHub.info was found in.
8.
When sfHub opens, it will be awaiting user input. Before proceeding in sfHub, connect to sfHub in sfStudio or other end user
application. It is normal for sfHub to not show any indication that it has connected to any program and for sfStudio (or other
end user application) to not show tracking data yet.
9.
sfHub will show a list the InertiaCam serial numbers logs have been recorded using. Enter the line number for the device,
then the line number for the desired log. Figure 34 follows the example provided earlier of a log a log was created using an
InertiaCam with serial number ICM-1705998-3 at 12:52PM on July 11, 2017, located at the ./sfHub/logs/ICM-1705998-3/
2017-07-11_12.52.23PM folder.
Figure 34 – sfHub Playback Menu