Interscience BAGMIXER 400, Руководство пользователя / Гарантия

Страница: 4 / 16

BagMixer
®
400
4
I. SETTING-UP
1. Take the BagMixer
®
400 out of its packaging and place it on a flat, stable surface.
2.
For W, VW and CC
®
models
: slide the drip tray under the blending
chamber; this will collect any drops or leaks during blending.
II. OPERATING
P and W models
1. Plug the power cord into the 220-240 V~ mains (110 V option available).
Check that the main switch at the back of the unit is in position “I”.
2. Adjust the “Timer” button on top of the unit to the required setting.
3. Open the front door by pulling the lever up. Place a bag containing the sample
in the unit and close the door while holding the bag. Push the lever down until
you feel a click.
BagMixer
®
400 starts automatically.
4. BagMixer
®
400 stops automatically at the end of cycle.
You may monitor the blending process through the window. (except for P model)
5.
Open the door and lift out the bag.
BagMixer
®
400 is ready for the next cycle.
Blending
time
TIMER