Interroll Transfer module SH 1400
22
Version 1.0 (06/2022) en
Translation of original operating instructions
Initial startup and operation
Initial startup
WARNING
Risk of injuries due to incorrect handling
4
Check electrical connections and protective devices.
4
Remove the goods from the module.
4
Remove unauthorized persons from the danger zone.
4
Wear safety shoes and work clothing.
The module has been checked at the factory. Module conveyor setting and module conveyor
tension are preset at the factory and generally do not have to be changed.
Nevertheless, the following control measure is required:
4
Before initial startup, check the travel direction of the module and correct as necessary
The travel direction is indicated on the module by an arrow. See the chapter "Nameplate".
4
If faults occur during startup, adjust the module conveyor setting. For additional information,
see
see "Maintenance and repair", page 28
ff.
