PDS 9339HS, Rev: Preliminary -5
PAGE 29 OF 47
8.5. Network
In Network, you can check the Network status, configure the WAN Settings, PC Settings,
DDNS settings, VLAN Settings, DMZ Settings, Virtual Server and PPTP Settings.
8.5.1.Status
You can check the current Network status in this page.
8.5.2.WAN Settings
In this page you can configure the VoIP Phone WAN port’s settings. The WAN port is
for you to connect to the ADSL Router, Broadband Router. Also you can use PPPoE to
get the WAN IP address from your ISP.
The VoIP Phone’s default setting is NAT mode. If you don’t need to use the NAT
Mode, you can change to Bridge Mode. If you change the setting to Bridge Mode, then
the PC setting will not effect and will be the same as WAN port.
The WAN port default is DHCP Client mode, you can change the setting to Fixed IP
Mode, or PPPoE Mode.
If you change the WAN port’s setting to Fix IP Mode, then you have to make sure the
IP address. Net Mask, Gateway, and DNS setting is suitable in your current network
environment.
If you change the WAN port’s setting to PPPoE Mode, you have to input a correct
username/password to get the IP address from your Internet Service Provider.
When you finished the settings, please click the Submit button. If there is nothing needs
to change, please click ‘Save Changes’ in the left side. The change you made will save
into the system and the system will restart automatically.
Содержание 9339HS
