Machines manufactured by Hydralok, Bristol, UK
Machine enquiries, sales, after sales service :
Interpump Hydraulics (UK) Ltd t/a IMM Hydraulics (UK) : Kidderminster
Tel : (0)121 550 1115 /
P a g e
|
16
r1
Remove the M6 clamp plate bolts (x2) by locating a bar or hex key into the torsion restraint holes in
the blade boss, shown above. Once both bolts have been removed the clamp plate can be removed
and the blade can be carefully removed and replaced as shown below ensuring that the teeth are
pointing in the correct direction. Once the new blade is installed these steps can be repeated in
reverse to reinstate all of the machine components. Ensure that thread locker is applied to the blade
clamp bolts on reassembly to prevent loosening over time.
Содержание Hydralok HCL Mobile
Страница 1: ...HCL Mobile Hose Cutter...
