ENGLISH - 15
ENGLISH - 16
5.4 Phone tips
If two different phones are connected at the same time to a single F3MC unit, the features
“Redialling last number” e “Voice dial” can be used only with the FIRST connected phone.
The second connected phone can only receive calls, or managed by hand commands
directly on the phone.
Depending on the phone model it could be necessary to have an active internet connection
to use the “Voice dial” feature.
The “Voice dial” feature could not be supported by your phone. Check the phone user
manual for more details.
From “SETUP” menu is possible to change two settings for the phone usage (Caller ID ON/
OFF e Voice answer ON/OFF), see chapter 3.1 for more details.
From “PHONE” menu, it is possible to go in Standby mode (led BLUE (6) flashing-menu
“INTERCOM”), pressing once the MFB (1) button.
5.5 GPS
After completing the pairing between F3MC and GPS device (see chapter 5.1) is possible
to listen to vocal instructions from the GPS for the routing. The GPS will stop any intercom
communication each time that will send a vocal instruction.
Check that the GPS device is compatible with Bluetooth® headsets, “HFP”
Bluetooth® profile has to be supported by GPS. Check GPS user guide
for more details. F3MC uses the “HFP” Bluetooth® profile to manage the
connection with GPS devices.
Navigation apps, installed on smartphone devices, use the A2DP Bluetooth® profile to send
routing indications to headset. This profile doesn’t let to automatically stop the intercom
communication when needed.
Car GPS navigator usually don’t support the HFP Bluetooth® profile. For this reason these
devices can’t send vocal routing instructions to Bluetooth® headset. Check GPS user guide
for more details.
5.2 Incoming phone calls
As indicated in chapter 2.6, phone calls have the highest priority and will override each
of other F3MC feature. During an incoming phone call these are the possible commands:
Answer to a phone call
Push MFB (1) or pronounce loudly any
word (in case that voice answer feature is
enabled Chapter 3.1).
End a phone call
Push once the MFB (1) button.
Reject a phone call
Push DOWN (3) button to reject.
Otherwise wait for 15 seconds, the call
will be automatically rejected.
Ringtone muting
Push UP (2) button to mute the ringtone.
5.3 Phone
All features related to phone can be activated entering into “PHONE” menu of F3MC.
With F3MC in Standby mode (led BLUE (6) flashing), push DOWN (3) button one time and
then press the MFB (1) button to activate the “PHONE” menu.
Redialling last number
Press UP(2) button to redial last number.
Voice dial
Press DOWN(3) button to activate the
voice dial feature of the phone. Follow
phone’s prompts to complete the task.