I. ADVANCED FUNCTIONS:
a.
VOX Activation / Deactivation:
-
When activated, the user can accept a call by saying any word within 10
seconds. The user can also reject a call by being silent for 10 seconds.
-
When deactivated, use the
MFB (1)
to answer a call.
The
Voice Answer Mode
can be enable or disable when the kit is in standby
mode (no ongoing call and no intercom communication).
Activation:
From Connected or standby, press and hold the
Volume Up (3)
button
until 3
rd
tone. Then release.
Deactivation:
From Connected or standby, press and hold the
Volume Down (4)
button
until 3
rd
tone. Then release.
b. Driver to Passenger INTERCOM:
The
INTERPHONE F2S
has a motorcycle intercom system that allows driver to
passenger conversations. This intercom features full-duplex communication so
driver and passenger may enjoy simultaneous conversations just like on the
telephone.
INTERCOM Pairing Procedure:
1.
Prepare two
BTMOTOF2S
.
Note: Make sure to switch off the phones paired
to these two headsets.
2.
Set the two units to pairing mode (from off, press and hold the
MFB (1)
of
the
BTMOTOF2S
until the
Status Indicator (5)
turns blinking red/blue).
3.
When the two are set to pairing, short press the
MFB (1)
of one of the two
units (this unit blinks red/blue fast). Pairing is successful if both
Status
indicator (5)
of the two units are steady blue. Both headsets are now
connected. Full duplex conversations can be made.
Using INTERCOM:
To Start an Intercom Conversation:
-
Long press the
MFB (1)
for about 3 seconds until 2
nd
beep will be heard.
BTMOTOF2S
will connect to Intercom. Both headsets are now connected.
Full duplex conversations can be made.
To End an Intercom Conversation:
- Short press the
MFB (1)
of the unit, the Intercom call will be ended.
To Set the Volume:
-
Press the
Volume Up (3)
or
Down (4)
button repeatedly until the desired
level is reached.
To Answer a Phone call:
-
Answer using
VOX
by loudly saying a word within 10 seconds or short
press
MFB (1)
button of the unit.
6
