Interphase Sea Scout, Руководство по эксплуатации

Страница: 35 / 55

35
Data View
From the
Control Center, press the soft key labeled
" DATA" to see a split screen display with large digits on
the left and a forward scanning view on the right. The
large numbers show the digital depth and, if your Sea
Scout is equipped with the optional speed/temperature
transducer, the boat speed, surface water temperature, and
distance traveled log.
Range Adjustment
Press the button labeled " RANGE" to bring up the Range
Adjustment soft key menu. Press the button labeled
"
AUTO" if you would like the Sea Scout’s internal
microprocessor to automatically select and adjust the
depth range as bottom conditions change. To manually
adjust the depth, press either the range buttons labeled
" " or " " or rotate the front panel knob. If you make a
manual depth adjustment, the AUTO range mode is
turned off and will remain off until the button labeled
AUTO is again selected. Note: when in the AUTO
mode, the soft key labeled "
AUTO" will be shown in
reverse video (white on black). To return to the main
forward looking menu, press the soft key labeled
" LAST".
Log Res. (Distance log reset).
If your Sea Scout is equipped with the optional speed/
temperature transducer, the
Sea Scout will automatically
keep a distance traveled log. You can reset this log to
zero by pressing the "
Log Res." soft key.
Note: The Sea Scout internal memory keeps the Sea
Scout’s distance log data, even when power is
removed. To zero out the distance log, press the
softkey labeled “Log Res.”.
Sensitivity Adjustment
Press the soft key labeled " SENS." (for sensitivity) to
bring up the choices available for adjusting the
Sea
Scout's receiver sensitivity. Press the button labeled
"
AUTO" so that the word AUTO is shown in reverse
video (white letters on a black background) if you would
like the
Sea Scout to automatically adjust its sensitivity
for changing conditions. To manually adjust the
sensitivity press the button labeled “
Sens.+” or “- Sens”
to increase or decrease the receiver gain. Note that the
soft key shows a number which indicates the relative