Interphase RE-Series RE-1, Руководство пользователя

Страница: 23 / 38

25 User Manual
♦
[H
OOK
]: hooks the EBL/VRM cross point allowing changing bearing and
range using the Cursor Keys. Pressing [C
ONFIRM
] once more confirms
the new range and bearing, pressing [C
ANCEL
] resets the original range
and bearing values.
♦
[O
FF
]: disables the EBL/VRM.
Up to 2 EBL/VRM's may be placed on the Radar screen at the same time. To turn
EBL/VRM On or Off or to select 1 EBL/VRM, 2 EBL/VRM or both (1+2) EBL/VRM,
follow the procedure:
[MENU] + "RADAR FEATURES" + [ENTER] + "EBL/VRM" + [ENTER]
2.3.7 Parallel Cursor
It’s a set of parallel lines with first line passing through the own ship's position
and next lines being placed equally spaced and extending from the own ship's
position towards one direction.
Parallel Cursor
Fig. 2.3.7 - Parallel Cursor display
The user can change the angle of the lines and the range between lines. It is used
to measure the bearing of other boats, navigate at a fixed distance from the
coast, measure the distance between two points.
The display of the Parallel Cursor can be turned On or Off following the procedure:
[MENU] + "RADAR FEATURES" + [ENTER] + "PARALLEL CURSOR" + [ENTER]
2.3.8 Center Offset
Allows to move the Radar center in any location of the screen.
2.3.8.1 Handling of Center Offset
If the Radar is in Relative Motion mode, positioning the Cross Cursor on the
center of the Radar image, allows editing the Center Offset ("CTR" message is
shown under the cursor position).
The soft keys are automatically displayed:
♦
[M
OVE
]: hooks the Radar image center allowing the user, using the
Cursor Keys, to move it at any location on the Radar screen. At this
point pressing [ENTER] confirms the new position of the center, press-
ing [CLEAR] resets the position of the Radar image at 0,0.
♦
[O
FFSET
]: opens an edit window where it is possible to edit the X Offset
and Y Offset position in pixel at which the center of the screen is posi-
tioned.