Interpack USA 2024-SB DH, Руководство пользователя

Страница: 42 / 99

UM094TW / UM594TW UDM094-04
42
T
ROUBLESHOOTING
C
ONTINUED
Trouble Possible Causes Solutions
Case Processes But
Leading End Panel Is
Crushed
Product Does Not Support The End
Panel Of The Case
Main Spring Tension On Tape Head
Too Strong
Insert Proper Dunnage Material
To Provide Support
Reduce Main Spring Tension.
See Tape Head Manual Provided
With Tape Head
Drive Belts Start, Then
Stop
Motor Starter Trips Call Maintenance
Void Fill Cases Do Not
Process Properly
Upper Tape Head Wipe Down
Rollers Collapse Inside Case.
-Install Lighter Gauge Tape Head
Main Spring
-Reduce Unwind Tension On
Tape Roll
a. Mandrel Tension
b. Clutch Roller Tension
Overfilled Cases Do
Not Process Properly
Product Height Exceeds Case
Height
Excessive Void Fill Dunnage.
Top Tape Head Box Is Not Adjusted
Properly
-Reduce Product In Case To
Match Case height
-Increase Case Height To Match
Product Height.
Reduce Void Fill Dunnage to
Match Case Height
Readjust Top Tape Head Box To
Proper Case Height
Unstable Cases Do not
Process Properly
Case Height Exceeds 1 ½ Times
The Case Length
-Re-Configure Case Dimensions
So That Case Is Not Unstable
-Process Case On Top and
Bottom Belt Drive Machine
Tape Not Centered on
Carton
Tape Roll Mandrel Not Centered on
Case.
Tape Roll Not Fully Pushed On
Tape Mandrel.
Center Tape Roll Mandrel, See
Tape Head Manual.
Push Tape Roll Completely Onto
Tape Mandrel.
Tape Leg Is Too Short /
Too Long
Tape Leg Adjustment Not Correct.
Tape Head Is Not Threaded
Correctly
Tape Roll Unwind Tension Is Too
Strong Or too Weak.
Adjust Tape Leg, See Tape Head
Manual.
Thread Tape Head Correctly,
See Section 7 page 33.
Adjust Unwind Tension, See
Tape Head Manual.